Blog Archives

Thickness: 2.3mm Material: Carbon graphite Zeppin Racing Clamp Type Battery Holder Chassis 2.3mm for BD5 must assemble with the following items (purchase separately): Zeppin Racing Clamp Type Alum Battery Holder Long 2pcs for BD5 CTB Chassis (# ZR-CTBBD5) Zeppin Racing Clamp Type Graphite Plate Upper 2pcs for CTB Chassis  (#ZR-CTB2) Zeppin Racing Clamp Type Graphite Plate Side 2pcs for CTB Chassis (# ZR-CTB3)...

The Clamp Type Alum Battery Holder Long is designed to use with Zeppin Racing BD5 CTB Chassis (# ZR-BD500CTB235)....

Zeppin Racing has released the new Clamp Type Battery (CTB) Holder Chassis 2.3mm for Yokomo BD5. Racers will be eminently benefited from this newly designed CTB chassis. The conventional chassis design use tape to hold down the battery on the chassis which affects flexibility of chassis. Our new chassis is designated to omit this issue and also providing more freedom of battery location by using the different thickness of foam between the holder and the battery in order to achieve perfect balance of the car for different weight/size of the battery. Clamp Type Battery Method provides freedom of chassis flex *The Battery Pushers (#ZR-BATPUSHER11 / #ZR-BATPUSHER16 ) are sold separately. Simply release two top screws to replace the battery. Adjust the thickness of the foam to position the battery. 88mm super narrow chassis. Redesigned pre-drilled holes to enhance stiffness of chassis while providing right amount of flex....