Zeppin Racing Softpack LiPo battery comes with extra T Plug free of charge Height:38mm Width:45mm Length:136mm Weight:414g Connector type:Gold Bullet 4mm These batteries must be charged ONLY with a charger designed to charge Lithium Polymer batteries which can apply the “Constant Current/Constant Voltage” (CC/CV) charge technique....
T plug balancing Hard case for protection of the battery Carbon style for awesome looking Reduced Internal Resistant Configuration: 3S1P Weight: 460 grams Dimensions: 138 mm x 46 mm x 38 mm Charge Rate: 5C Continuous Discharge 40C Max Burst Rate: 80C Min Discharge Volts Per Pack: 9V Max Volts Per Cell: 4.2V Max Volts Per Pack: 12.6V ALWAYS use a LiPo-approved charger ALWAYS use a LiPo cell balancer ALWAYS use a LiPo charging bag when charging ALWAYS charge in a fireproof location ALWAYS set charger’s output volts to match battery volts ALWAYS keep out of reach of children NEVER charge over 4.2V per cell NEVER trickle charge NEVER allow to discharge below 3V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging...
Wanna be the brightest kit in the dark? Highly recommend this Zeppin Racing LED Controller set. Easy to connect up to three LED strips by JST connectors. Setting the flashing patterns of your LED set freely by the infrared remote control. Make it eye catching of your rc car especially for drifting and tractor truck. Click here for LED Strip Totally five different flashing patterns: Solid Flash Strobe Fade Smooth Spec: Input: DC 7V-12V Weight: 15g with cables Dimension: 35mm x 30mm x 8.7mm Device Include: LED Controller 3 channel IR Remote Control...
Zeppin Racing Softpack LiPo battery comes with extra T Plug free of charge Height:23mm Width:50mm Length:148mm Weight:380g Connector type:Gold Bullet 4mm These batteries must be charged ONLY with a charger designed to charge Lithium Polymer batteries which can apply the “Constant Current/Constant Voltage” (CC/CV) charge technique....
This pinion holder holds 18pcs of pinions combine with solder helper. The solder helper is friend of EP racer which help them to hold all kinds of popular banana tubes 2.0mm 2.6mm, 3.0mm 3.5mm, 3.6mm, 4mm, 4.3mm, 5mm. And the clamp type holder which is able to hold T-Plug and speed controller securely, just works like your third hand. Also there is wire slops where you can place a wire in there for tinning. Sample:...
Feature: Small in size 20 x 28 x 15MM Super Light Weight 4-10 cells 100A Max. Current High Frequency 1KC One Touch Setup Led indicator Forward and brake...
