...
Read more 0 comments Zeppin Racing Body Supporter 6mm Black For 1:10 Touring
Blog Archives
Zeppin Racing 18.5 25C 3600mah Lipo with gold bullet 4mm with extra T plug
Zeppin Racing Softpack LiPo battery comes with extra T Plug free of charge Height:23mm Width:50mm Length:148mm Weight:380g Connector type:Gold Bullet 4mm These batteries must be charged ONLY with a charger designed to charge Lithium Polymer batteries which can apply the “Constant Current/Constant Voltage” (CC/CV) charge technique....
Read more 0 comments Zeppin Racing 7.4V 20C 2S 1800mah Lipo (Gold Bullet 3.5mm)
Zeppin Racing Body Supporter 6mm Blue For 1:10 Touring
Zeppin Racing 18.5v 25C 5500mah Lipo with gold bullet 4mm with extra T plug
Zeppin Racing Softpack LiPo battery comes with extra T Plug free of charge Height:44mm Width:50mm Length:148mm Weight:610g Connector type:Gold Bullet 4mm These batteries must be charged ONLY with a charger designed to charge Lithium Polymer batteries which can apply the “Constant Current/Constant Voltage” (CC/CV) charge technique....
Read more 0 comments Zeppin Racing 11.1V 2100mAh 5C For TX 3PK/M11
JST plug balancing Soft case for weight saving Configuration: 3S1P Weight: 124g Dimensions: 102 x 46 x 13 mm Charge Rate: Max. Life Spin 1C Continuous Discharge 5C Max Burst Rate: 10C Min Discharge Volts Per Pack: 9V Max Volts Per Cell: 4.2V Max Volts Per Pack: 12.6V ALWAYS use a LiPo-approved charger ALWAYS use a LiPo cell balancer ALWAYS use a LiPo charging bag when charging ALWAYS charge in a fireproof location ALWAYS set charger’s output volts to match battery volts ALWAYS keep out of reach of children NEVER charge over 4.2V per cell NEVER trickle charge NEVER allow to discharge below 3V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging...
Read more 0 comments Zeppin Racing 1/8 Buggy Inline Thunder ZR-1 Exhaust Set
Zeppin Racing would like to introduce the new 2 chambers exhaust system for .21 off road engines, the “Thunder ZR-1” Dual Chamber and stringer reinforced support. Designed for in mind for high toque while maintain great top speed. So far, we have great feedback from testing for the benefit of more responsive power band, faster spool up and improve fuel consumption. Package including exhaust manifold, gaskets, mounting springs....
Read more 0 comments Zeppin Racing 22.2v 25C 3200mah Lipo with gold bullet 4mm with extra T plug
Zeppin Racing Softpack LiPo battery comes with extra T Plug free of charge Height:37mm Width:45mm Length:134mm Weight:414g Connector type:Gold Bullet 4mm These batteries must be charged ONLY with a charger designed to charge Lithium Polymer batteries which can apply the “Constant Current/Constant Voltage” (CC/CV) charge technique....
Read more 0 comments Zeppin Racing Hex Button Head Steel Screw M3x6 10pc
Zeppin Racing Pinion Holder with Solder Helper – Light Blue
This pinion holder holds 18pcs of pinions combine with solder helper. The solder helper is friend of EP racer which help them to hold all kinds of popular banana tubes 2.0mm 2.6mm, 3.0mm 3.5mm, 3.6mm, 4mm, 4.3mm, 5mm. And the clamp type holder which is able to hold T-Plug and speed controller securely, just works like your third hand. Also there is wire slops where you can place a wire in there for tinning. Sample:...
Read more 0 comments Zeppin Racing 22.2v 25C 3600mah Lipo with gold bullet 4mm with extra T plug
Zeppin Racing Softpack LiPo battery comes with extra T Plug free of chargeHeight:34mmWidth:50mmLength:148mmWeight:456gConnector type:Gold Bullet 4mmThese batteries must be charged ONLY with a charger designed to charge Lithium Polymer batteries which can apply the Constant Current/Constant Voltage (CC/CV) charge technique....
Read more 0 comments Zeppin Racing Pinion Holder with Solder Helper – Titanium
This pinion holder holds 18pcs of pinions combine with solder helper. The solder helper is friend of EP racer which help them to hold all kinds of popular banana tubes 2.0mm 2.6mm, 3.0mm 3.5mm, 3.6mm, 4mm, 4.3mm, 5mm. And the clamp type holder which is able to hold T-Plug and speed controller securely, just works like your third hand. Also there is wire slops where you can place a wire in there for tinning. Sample:...
Read more 0 comments Zeppin Racing 22.2v 25C 4800mah Lipo with gold bullet 4mm with extra T plug
Zeppin Racing Softpack LiPo battery comes with extra T Plug free of charge Height:46mm Width:50mm Length:148mm Weight:600g Connector type:Gold Bullet 4mm These batteries must be charged ONLY with a charger designed to charge Lithium Polymer batteries which can apply the Constant Current/Constant Voltage (CC/CV) charge technique....
Read more 0 comments Zeppin Racing Pinion 1st 16T 7075 Hard Coated For 733
Zeppin Racing 22.2v 25C 5500mah Lipo with gold bullet 4mm with extra T plug
Zeppin Racing Softpack LiPo battery comes with extra T Plug free of charge Height:52mm Width:45mm Length:138mm Weight:732g Connector type:Gold Bullet 4mm These batteries must be charged ONLY with a charger designed to charge Lithium Polymer batteries which can apply the “Constant Current/Constant Voltage” (CC/CV) charge technique....
Read more 0 comments Zeppin Racing Pinion 1st 18T 7075 Hard Coated For 733
Zeppin Racing 18.5v 30C 5500mah Lipo with gold bullet 4mm with extra T plug
Zeppin Racing Softpack LiPo battery comes with extra T Plug free of charge Height:44mm Width:50mm Length:148mm Weight:640g Connector type:Gold Bullet 4mm These batteries must be charged ONLY with a charger designed to charge Lithium Polymer batteries which can apply the “Constant Current/Constant Voltage” (CC/CV) charge technique....
Read more 0 comments Zeppin Racing Standard Grip Clutch Shoe For 733
Zeppin Racing Rubber Rear Belt 3X186MM for Xray T3 BD5
Zeppin Racing CA Nozzle (5Pcs)
Zeppin Racing Rubber Rear Belt 3X183MM for Xray T3
Zeppin Racing Red “EASY PULL” Body Pin Wire 100mm 1Pr
Zeppin Racing 3mm Ceramic Ball 12 Pcs
Zeppin Racing Black “EASY PULL” Body Pin Wire 100mm 1Pr
Zeppin Racing 5x10x4mm Ceramic Bearing SI3N4 2Pcs
These Zeppin Racing 5x10x4mm Ceramic Bearings are designed for many popular RC cars, including Team Associated TC6.1 and XRAY T3 2012....
Read more 0 comments Zeppin Racing 7075 Alu Hard Coated Pinion 1st 18T For NT1
Zeppin Racing 10x15x4 Ceramic Bearing 2 Pcs
These Zeppin Racing 10x15x4mm Ceramic Bearings are designed for many popular RC cars, including Team Associated TC6.1 and XRAY T3 2012....
Read more 0 comments Zeppin Racing 7075 Alu Hard Coated Pinion 1st 17T For NT1
