This Gear Differential Outdrive for Team Associated TC6.1 is made of Spring Steel, which is more durable than the stock aluminum part. Perfect use with front Diff. to resist stress. ...
These Zeppin Racing 7075 Aluminum Rear Hub 2.5Deg (Left+ Right) for Team Associated TC6.1, which are designed to be much more durable than the original plastic parts. ...
These Zeppin Racing 7075 Aluminum Caster Blocks 4.5deg (Left+ Right) for Team Associated TC6.1 are designed to have enlarged holes at the center. Such design is to avoid the double joint dog bones touching the caster blocks when turning at full degree. In addition to increase the smoothness, there is a Delrin insert added for the hinge pin. ...
These Zeppin Racing Aluminum 7075 Upper Clamp -2mm With Adj Roll-center L+R for XRAY T3, which the inboard upper links have been lowered by 2mm in order to make the roll center higher. Higher roll center will enable racers to have more flexibility on adjustment. In addition, it will also make the car to lean less. Racers may use these Upper Clamp to change the balance of the car as according to their driving preferences and track conditions....
These Zeppin Racing Aluminum 7075 0Deg Rear Hubs are designed for XRAY T4 & T3, which are more durable than stock plastic version. The parts have been lightened yet still reserving their durability, which only weight 9g (1 pair)...
This Top Plate for Team Associated TC6.1 features thinner thickness and modified middle plate design, to provide even more flex in order to greatly enhance the overall traction....
This Zeppin Racing 7075 Aluminum Spool Hub for Team Associated 6.1 is more durable version to the original part, yet it is designed to be very light in weight, only 3.8g. ...
This 7075 Aluminum Upper Clamp is designed to enable racers to have finer adjustments of both the link angle and length, providing them more options to tune to their track conditions. The caps feature 3 positions for setting the roll center. Only FR or RL side of the Upper Clamp is included (The photo shown below is for reference only)...
This 7075 Aluminum Upper Clamp is designed to enable racers to have finer adjustments of both the link angle and length, providing them more options to tune to their track conditions. The caps feature 3 positions for setting the roll center. Only FL or RR side of the Upper Clamp is included (The photo shown below is for reference only)...
This is Zeppin Racing Graphite Shock Tower Front for Team Associated TC6.1, which is designed to be used with Zeppin Racing Upper Clamp With Adj Roll-Center. Please click the following links for details of the Upper Clamp With Adj Roll-Center: Zeppin Racing Upper Clamp With Adj Roll-center (FL or RR) for TC6.1 Zeppin Racing Upper Clamp With Adj Roll-center (FR or RL) for TC6.1 The following photos are for references only...
This is Zeppin Racing Graphite Shock Tower Rear for Team Associated TC6.1, which is designed to be used with Zeppin Upper Clamp With Adj Roll-Center. Please click the following links for details of the Upper Clamp With Adj Roll-Center: Zeppin Racing Upper Clamp With Adj Roll-center (FL or RR) for TC6.1 Zeppin Racing Upper Clamp With Adj Roll-center (FR or RL) for TC6.1 ...
This is modified 7075 Aluminum Spur Gear Light Weight Hub for Team Associated TC6.1, which only weight 2.2g (the original part weight 2.8g) without sacrificing on durability ...
These Zeppin Racing Aluminum 7075 Front Knuckle Arms are designed for XRAY T4 & T3, which are more durable than stock plastic version. The parts have been lightened yet still reserving their durability, which only weight 12.2g (1 pair)....
This Zeppin Racing Belt Pulley 25T for Mugen MTX5 is made of high quality 7075 hard coated Aluminum. It has been lightened for minimizing lost, and improving acceleration and braking efficiency. Reducing weight from moving parts are up to 4 times more effective than reducing weight from parts that are fixed in position....
This Zeppin Racing Front Diff Pulley for Mugen MTX5 is made of high quality 7075 hard coated Aluminum. It has been lightened for minimizing lost, and improving acceleration and braking efficiency. Reducing weight from moving parts are up to 4 times more effective than reducing weight from parts that are fixed in position....
The original version of the Top Plate for Team Associated TC6.1 was engineered for firmness. In addition, the upper deck is too wide that it is touching the motor which causes restriction to it’s level of twist. Our newly designed 2mm Flex Top Plate for TC6.1 is 2mm narrower (-1mm each side) to avoid touching the motor. Plus adding extra holes providing a bit more flex in order to improve over all traction. ...
Aiming for more steering on the T3 chassis, we deliberately making a narrower top deck to increase the steering especially at the mid corner section. This chassis is made by the best grade 2.0mm thick graphite material, specially designed and optimized for racing conditions. ...
Thickness: 2.3mm Material: Carbon graphite Zeppin Racing Clamp Type Battery Holder Chassis 2.3mm for BD5 must assemble with the following items (purchase separately): Zeppin Racing Clamp Type Alum Battery Holder Long 2pcs for BD5 CTB Chassis (# ZR-CTBBD5) Zeppin Racing Clamp Type Graphite Plate Upper 2pcs for CTB Chassis (#ZR-CTB2) Zeppin Racing Clamp Type Graphite Plate Side 2pcs for CTB Chassis (# ZR-CTB3)...
Thickness: 2.1mm Material: Carbon graphite Zeppin Racing Clamp Type Battery Holder Chassis 2.1mm for TC6 must assemble with the following items (purchase separately): Zeppin Racing Clamp Type Alum Battery Holder Short 2pcs for T3\TC6 CTB Chassis (# ZR-CTBT3) Zeppin Racing Clamp Type Graphite Plate Upper 2pcs for CTB Chassis (#ZR-CTB2) Zeppin Racing Clamp Type Graphite Plate Side 2pcs for CTB Chassis (# ZR-CTB3)...
The Clamp Type Graphite Plate Side is designed to use with Zeppin Racing T3 (# ZR-T3001CTB235) / TC6 (# ZR-TC6CTB21) / BD5 ( #ZR-BD500CTB235) CTB Chassis...
The Clamp Type Alum Battery Holder Short is designed to use with Zeppin Racing T3 (# ZR-T3001CTB235) / TC6 (# ZR-TC6CTB21) / BD5 ( # ZR-BD500CTB235) CTB Chassis...
Zeppin Racing has released the new Clamp Type Battery (CTB) Holder Chassis 2.3mm for Yokomo BD5. Racers will be eminently benefited from this newly designed CTB chassis. The conventional chassis design use tape to hold down the battery on the chassis which affects flexibility of chassis. Our new chassis is designated to omit this issue and also providing more freedom of battery location by using the different thickness of foam between the holder and the battery in order to achieve perfect balance of the car for different weight/size of the battery. Clamp Type Battery Method provides freedom of chassis flex *The Battery Pushers (#ZR-BATPUSHER11 / #ZR-BATPUSHER16 ) are sold separately. Simply release two top screws to replace the battery. Adjust the thickness of the foam to position the battery. 88mm super narrow chassis. Redesigned pre-drilled holes to enhance stiffness of chassis while providing right amount of flex....
Zeppin Racing has released the new Clamp Type Battery (CTB) Holder Chassis 2.1mm for Associated TC6. Racers will be eminently benefited from this newly designed CTB chassis. The conventional chassis design use tape to hold down the battery on the chassis which affects flexibility of chassis. Our new chassis is designated to omit this issue and also providing more freedom of battery location by using the different thickness of foam between the holder and the battery in order to achieve perfect balance of the car for different weight/size of the battery. Clamp Type Battery Method provides freedom of chassis flex. Simply release two top screws to replace the battery. Adjust the thickness of the foam to position the battery. 88mm super narrow chassis. Enhanced rear end traction by narrowing the rear end of the chassis. Enhanced the thickness, 0.1mm thicker then original Enhanced rear...
Zeppin Racing has developed a new carbon chassis for Yokomo BD5 series touring car. It is especially designed to enhance the characteristics throughout on medium traction surface. Providing tuning preference for racers to enhance the performance adopting on different track surface and driving technique. Compatible with Yokomo BD5 Series chassis. Redesigned Pre-drilled holes to enhance chassis stiffness whileproviding right amount of flex. Stable and mid corner steering increased on medium traction condition. 2.25mm thickness lowering the CG for better performance. 88mm super narrow chassis for corner speed and avoid scrubbing to the ground....
